EcoOne Instructions

Please FOLLOW THE INSTRUCTIONS CAREFULLY in order to maximize the benefits of

Initial Start Up

• Take out Spa filter from filter compartment.
• Add the bottle Pipe Cleanser to your existing water and turn on all jets, pump(s) and air controls as many times a day as possible. You can use your hot tub during this purging process for up to a month. When the water gets cloudy and has some 'organic' smell to it, let it flush for another 48 hours or so without using your tub.
• Drain your hot tub water and clean your shell with EcoOne Shell & Liner Cleaner or vinegar and water; mix and rinse thoroughly. Never use an abrasive cleaning product on your shell.
• Clean your vinyl cover with EcoOne Shell & Liner Cleaner. Make sure you reach between creases and stitching.
• Refill your hot tub. For best results, use EcoOne Pre Filter (read instructions first) and let water warm to 30 °C minimum.
• Balance your water:
• pH should ready 7.2 to 8.2
• Alkalinity should read between 70 to 120
• Hardness (Calcium) 200 to 400 ppm
• Add the bottle EcoOne Spa Monthly with jets running.
• Clean your hot tub filter thoroughly using EcoOne Filter Cleanser. Once you have completed the filter cleaning process as per the instructions on the back of the bottle, you can place the filter back into the hot tub.

REGULAR MAINTENANCE

• Every two to four weeks (depending on use) clean filter and check cover for mould. Clean cover if necessary with EcoOne Shell & Liner Cleaner
• Once a month add one bottle of EcoOne Spa Monthly
• Maintain proper pH, Alkalinity and Sanitizer levels at all times. For more detailed instructions on how to maintain proper levels, read our Hot Tub Maintenance guide.